Valspar® Medallion Interior Paint protects with a 100% acrylic coating for a lifetime of interior beauty.
Valspar Medallion Interior Paint protects with a 100% acrylic coating for a lifetime of interior beauty. Paint dries quickly and cleans up easily with soap and water.
*This product contains 0 g/L VOC as calculated within the margin of error by EPA Method 24.
Use paint on properly prepared interior wall and ceiling surfaces including previously painted and primed plaster, brick, drywall, cement, wood, metal and wallpaper.
Clean and dry the surface thoroughly, removing all dirt, dust, rust, grease and wax. Scrape off loose paint and wallpaper. Remove glue, shellac and sizing. Patch cracks and prime. Dull glossy surfaces with gloss remover or sandpaper. Remove chalky residue and prime unpainted plaster and wallboard with latex wall primer. New wood surfaces should be sanded smooth and primed with latex wood trim primer or latex wall primer. If painting over wallpaper, test pattern for bleeding. If bleeding occurs, remove the paper or prime with oil-based stain block or latex stain killer primers.
Use paint on all exterior surfaces, including wood siding and trim, hardboard siding, primed metal, shakes, shingles, brick, cement, cinder block, stucco, concrete, stone, asbestos, galvanized steel, aluminum and vinyl siding. DO NOT USE on glazed brick, glazed aluminum, glazed masonry, floors or steps.
Before you paint clean and dry the surface thoroughly, removing all dirt, dust, rust and grease. On bare wood, coat knots and sappy areas with stain block primer/sealer. Then prime entire surface with exterior oil or latex primer. On previously painted surfaces, scrape, sand, then prime. Wire brush badly chalking areas. Dull glossy surfaces with gloss remover or sandpaper. Countersink nails and fill with putty. Caulk all cracks and joints.
On unprimed, pre-primed or previously painted hardboard siding, prime with an exterior oil primer.
On masonry, wire brush loose materials from chalky areas.
On metal, remove rust on galvanized gutters and prime with a rust inhibitive primer.
On new galvanized surfaces, allow to age 6 months before painting or clean with muriatic acid.
On unpainted metal surfaces, remove rust, clean with mineral spirits and prime with a rust inhibitive primer.
On vinyl siding, wash weathered vinyl siding thoroughly and allow to dry. Then paint with a color lighter than the original siding color.
WARNING! Painting vinyl siding with darker colors will cause warping or deformation from heat absorption.
CLEAN MILDEW FROM THE SURFACE! Mildew is a fungus that looks like dirt, but won’t wash off. Mildew must be removed before painting or it will grow through any new coating. To remove mildew, scrub with a commercial mildew remover or a solution of 1 part liquid chlorine bleach to 3 parts water. Rinse thoroughly and allow to dry. Protect eyes and skin by wearing protective equipment, including rubber gloves and eye goggles when working with the bleach solution.
Established in 2012, Celebration Hardware is a leading supplier of hardware, tools, PPG Paint, Valpsar Paint, electrical, lighting, plumbing, fasteners and maintenance supplies to residential and commercial customers in Central Florida.
Hardware is in our History.
Our company founders are part of DaCorta Hardware, a leading supplier of hardware, paint and building materials serving metropolitan New York since 1946.
Price is Something we Take Very Seriously.
Celebration Hardware realizes that in most retail experiences “price” is the driving force behind where consumers shop. We work hard to deliver value to our customers.
Celebration Hardware Company
57 Blake Boulevard
Celebration, FL 34747
Located in the Publix anchored Water Tower Shopping Center on the corner of 192 and Celebration Avenue in Celebration, Florida.